Pneumatic Stamping Machine Introduction

Pneumatic Stamping Machine Introduction:

The pneumatic punching machine uses the high-pressure gas generated by the compressor to deliver the compressed gas to the solenoid valve through the pipeline and controls the action of the solenoid valve through the foot switch to control the work and return of the cylinder, so as to achieve the purpose of punching. Compressed air can be stored in the air storage tank and can be used at any time, so the motor has no energy waste from idling. The cylinder is used as the working part and the solenoid valve is used as the control element so that the structure of the machine is simpler, the failure rate is low, the safety is high, the maintenance is simple, the maintenance cost is lower, and the production efficiency is high. The 220V power supply is used to realize the control of the solenoid valve, and the operation is simple and convenient.

Equipment principle features:
1. Using compressed air as the power source, it is highly efficient and easy to operate, with a simple structure and little maintenance.
2. There is no noise generated when the hydraulic system is in standby, which can save power consumption and reduce production costs.
3. Height, speed, stroke, pressure and punching time can be adjusted arbitrarily according to different products or molds.
4. Equipped with anti-rotation guide rods and guide plates, with high precision and suitable for high-speed precision blanking.
5. You can choose two-hand control or pedal mode. Ensure operator's personal safety.
6. Using a microcomputer control system, the model can be selected from manual, semi-automatic and fully automatic. Heated molds, temperature controls and pressure sensors can be added. The structure is simple, and the pneumatic technology is adopted to realize that one air compressor can supply multiple pneumatic punching machines at the same time, which is more energy-saving than electric punching machines. Reduce power consumption. The operation is simple, the safety type is high, and the foot switch is used to control the solenoid valve, the structure is simple, the failure rate is low, and the production efficiency is improved.

Scope of application:
Pneumatic punching machine is suitable for electronics, instruments, meters, cameras, jewelry, hardware and clothing, shoes and hats industries; it can perform processes such as cutting, punching, blanking, forming, bending, riveting and other processes for thin plates, strips, and coils; Suitable for processing non-ferrous metals, plastic parts, etc.